LifeSpan C3i Owner's Manual page 36

Engineering Mode
To Enter Engineering Mode, Press and hold the Enter Button and the Up button for 3 seconds. The
console will beep and display Engineering Mode.
Function
Press Enter. The display will show Roller. This is
something that does not need adjustment
Press Enter. The display will show Select the units.
Press the up or down buttons to change between Si
(metric) or EN English modes.
Press Enter. The display will show Set calendar On or
To set the console to go into sleep mode set Electricity
Press Enter. The display will show Total Distance. It will
show 1 digit on the left and 3 digits on the right for a
total of 4 digits. This is the total number or miles or
Kilometers accumulated.
Press Enter. The display will show Total Hours. It will
show 1 digit on the left and 3 digits on the right for a
total of 4 digits. This is the total number of hours the
bike has been used.
Press Enter
4
If everything is tight, contact LifeSpan Customer Service for replacement pedals
36
1830
0
0
Console goes back to normal operating mode
front
frame components.
C3i
Display
Engineering Mode
Roller
Select the Units
Si or EN
Total Distance
Total Hours
000
000