LifeSpan C3i Owner's Manual page 12

Step 3: Seat Post Assembly
A. Turn seat post adjustment knob (M)
counter clockwise 3 full turns to loosen.
B. Insert the seat post (4) into seat post
cover. The holes in the seat post should
be pointing toward the rear of the bike.
C. Pull on the seat post adjustment knob (M)
to release the locking pin and slide the
seat post (4) down into the seat post tube (L).
D. When the desired height is reached, release
the seat post adjustment knob (M) to allow
the locking pin to engage.
E. Turn the seat post adjustment knob clockwise
to tighten.
Note: In order to complete Step 5 and 6,
the seat post needs to be set to the highest
level. Pull the seat post up until the lock pin
clicks in the last hole in the seat post
Step 4: Seat Assembly
A. Place the seat (5) over the seat mount post (N).
B. A lign the seat (5) so the front of the seat is
is centered with the console mast (7) and
C. S ecurely tighten the pre-installed nut (23)
on each side of the seat mounting bracket (O)
under the seat (5).
12
4
M
L
5
9
23
N