LifeSpan C3i Owner's Manual page 13

Step 5: Front Support Assembly
A. Adjust the seat post so it is at the highest setting.
B. Tilt the bike back until it is resting on the seat and the rear support assembly (as shown below.)
C. Align the front support assembly (2) with the front main frame bracket (B).
D. Install two M8 bolts (15) and washers (16) through the top holes of the front main frame
bracket (B) and into the front support assembly (2).
Do not tighten bolts yet
E. Install two M8 bolts (15) and washers (16) through the middle holes of the front main
frame bracket (B) and into the front support assembly (2).
Do not tighten bolts yet
F. Install two M8 bolts (15) and washers (16) through the bottom holes of the front main
frame bracket (B) and into the front support assembly (2).
Do not tighten bolts yet
G.
two M8 top bolts and two M8 bottom bolts.
2
16
15
B
16
M8
16
15
(15)
15
C3i
Interactive Trainer
13