Advertisement
Step 9: Console Upright Assembly
A. Slide the upright cover (11) a third
of the way up the console upright
assembly (10) as shown below.
Note: Remove wire ties from
connectors (N) and (O).
B. Align the console upright assembly
(10) with the console upright
bracket (P) on the main frame
assembly (1). Plug the two
connectors (N) from the console
upright assembly (10) into the
two connectors (O) coming from
the main frame assembly (1).
C. Tuck excess wiring into the
bottom tube of the console upright
assembly (10).
Note: Be Careful not to pinch
the wiring when securing
the upright assembly (10) to
the console upright bracket (P).
D. Install three M8 bolts (27) through
the console upright assembly (10)
and into the console upright
bracket (P) Do not tighten until
.
all three bolts are installed.
E . Slide the upright cover (11)
down the console upright
assembly (10) to cover the
mounting bolts and bracket.
into place.
10
11
O
N
10
P
27
R3i
Interactive Trainer
1
19
Advertisement
