LifeSpan R3i Owner's Manual page 11

Step 1: Remove Components from Box
B. Locate the hardware bag.
Step 2: Rear Support Assembly
A. Align the rear support assembly (3) with
B. Set the rear of the main frame assembly on the seat (9) with bolts facing upward as
shown below, this will raise the
support assembly.
C. Install three M8 bolts (19) through the rear support assembly (3) and into the rear
bracket (B). Do not fully tighten the bolts until all three bolts are installed.
D
the rear bracket (B).
frame making it easier to install the rear
9
B
19
R3i
Interactive Trainer
19
3
11