LifeSpan R3i Owner's Manual page 12

Step 3: Front Support Assembly
A. Move the seat (9) forward so it is located in the position as shown below.
B. Align the front support assembly (2) with the front bracket (A).
C. Install two M8 bolts (15) and curve washers (16) through the front support assembly (2) and
into the front bracket (A). Tighten these bolts prior to starting step D.
D. Insert two M8 bolts (19) through the top of the front bracket (A) and into the front
support assembly (2).
12
19
2
A
16
15
1
9