Advertisement
Step 5: Seatback / Armrest Assembly
Note:
Make sure seat is locked and
remove wire ties from connectors
(H) and (I).
A. Plug connectors (H) from the top of
seat mount (14) to connectors (I)
from the base of the
seatback/armrest assembly (5).
Note: It does not matter which
connectors plug into each other as
long as both connectors are
plugged in.
B. Push excess wiring into the
seatback/armrest assembly (5) wire
hole.
Note: Be careful not to pinch the
wiring when securing the seatback
assembly (5) to the seat mount (14).
C. Align the armrest tube (J) with the
c
orresponding bracket (K) and insert
into the bracket.
D. Install the two M10 carriage bolts
(20) through the bracket (K), the
armrest tube (J).
E. Install the two M10 washers (21) and
M10 nuts (22) onto M10 carriage bolts
(20) and securely tighten.
14
I
14
20
14
K
22
5
H
J
21
Advertisement
