7-40 Troubleshooting
Problems with Configuration Diskette Creator
The bit map of the Configuration Diskette Creator window is not displayed correctly
during settings of setup information. (When the Trekking command is used)
If the specified number of colors is fewer than 256 in the display setting, the bit
map is not displayed correctly, but the setup information can be displayed.
The Point to Point tunneling protocol cannot be set.
The protocol is not supported at present. After installation, set the protocol
through Control Panel. In this case, rebooting is not necessary.
The details of a network adapter cannot be set.
Configuration Diskette Creator is unable to set the details of network adapters.
Start Windows Server 2003, and set the details through Control Panel.