Table of Contents
Advertisement
5-8 Installing and Using Utilities
Configuration Diskette Creator
"Configuration Diskette Creator" is a tool to create [Configuration Diskette] that is used for
configuring the server with the Express Setup.
If you use the Configuration Diskette created by the Express Setup and Configuration Diskette
Creator to operate the setup, you can setup from the installation of OS to several utilities
automatically except for a few key input to confirm the specification. Also, you can install the
system with the same specification as before when re-installing the system. We recommend you to
create [Configuration Diskette] to setup the servers from NEC EXPRESSBUILDER.
NOTE:
You can install Windows Server 2003 without [Configuration Diskette]. Also, you can
modify/newly create [Configuration Diskette] during the setup with NEC
EXPRESSBUILDER.
Creating Configuration Diskette
This section describes about specifying setup information that is necessary for OS installation and
creating [Configuration Diskette]. Follow the procedure below.
NOTE:
In the procedure below, the folder name that is specified when installing Trekking command is
assumed as [Configuration Diskette Creator].
1.
Start the OS.
2.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu will appear.
3.
Right-click on the screen or click [Setup]. The menu will appear.
Advertisement
Table of Contents
Troubleshooting
