NEC N8800-096F User Manual page 223

4-86 System Configuration
No. Error message
7
Failed to create rollback image.
8
Failed to erase.
9
Unsupported format version:
10 Failed to load the update image
file.
11
Update has failed.
12
Could not switch to the update
mode.
13
Could not find the update targets:
14
Invalid address:
15
Writing has failed.
16
Unsupported token is detected:
17
Invalid segment information:
18
Invalid data length:
19
Failed to open the file:
20 Failed to close the file:
21
Invalid file checksum:
22
Failed to parse files.
23
Failed to parse files:
24
Failed to load files:
25
Could not find files:
26
Failed to verify
27 Update will be stopped because
interruption has occurred.
28
Online update is now being used.
29
Failed to acquire the current
revision.
30
Failed to acquire lines:
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
The specified file may not exist. Check the file name.
The specified file may be corrupted.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Some update files may be corrupted. Obtain update
files again.
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Check clients. A software program other than you are
using may have interrupted.
Try again as necessary after online update performed
by other tool is completed.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
Some update files may be corrupted. Obtain update
files again.
Action