Maintenance Of The Server - NEC N8800-096F User Manual

Maintenance of the Server

The server maintenance can be done in two ways; one is to use NEC ESMPRO Manager for remote
maintenance and the other is to use the NEC ESMPRO Agent Server Maintenance Utility on the
server for local maintenance.
TIPS:
To start the NEC ESMPRO Agent Server Maintenance Utility installed in server, select the items
as follows:
Start Menu [All Programs] [NEC ESMPRO Agent] [Server Maintenance Utility]
The maintenance functions that can be executed from NEC ESMPRO include three types, those
common to all components, those specific to particular components, and general system settings.
The maintenance functions common to all components are operated in the same way basically (the
operation procedure and typical examples of screen images are described below).
The table below lists the maintenance functions common to all components.
Component
CPU module
IO module
PCI slot
Ethernet board
SCSI adapter
SCSI enclosure
SCSI electronics
SCSI slot
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using Server Maintenance Utility
: Support
–: Not support
The maintenance operations in the table cannot be performed while collecting dump or updating
firmware. Wait until such processing is finished to perform the operations in the table.
Start Stop
R L R L
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
Installing and Using Utilities 5-55
Diag-
MTBF
clear
nosis
R L R L
– –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
F/W
update
R L
– –
– –
– –
– –
– –
– –
– –