NEC N8800-096F User Manual page 114

9.
Select and right-click a disk, and then
select [Convert to Dynamic Disk].
IMPORTANT:
If [Foreign] appears, execute [Convert to Dynamic Disk] after [Convert to Basic Disk]
is executed.
10.
Open the disk's properties to check the target IDs. In the following figures, disks are
configured as:
Disk 1: Target ID 1
Disk 2: Target ID 2
Disk 4: Target ID 4
Disk 5: Target ID 5
Disks with the pair of target ID 1 and 4, 2 and 5 are mirrored.
Disk 1
Windows Setup and Operation 3-19
Disk 2