NEC N8800-096F User Manual page 337

7-10 Troubleshooting
On-screen error message
9027
9028
9029
902A
902B
9031
9032
9033
9034
903A
9040 - 9047
9050 - 9055
Cause
Mounted CPU is
mismatching.
Memory of the different types
is installed.
DIMM is faulty.
Initialization of the cross-link
between the CPU/IO modules
and access are faulty.
BIOS revision does not
match.
Configuration of PCI riser is
mismatch.
The microcode to CPU is not
found and it cannot update
normally.
The microcode to CPU
cannot update
normally.
DIMM is faulty.
DIMM is faulty.
CPU is faulty.(ID=0-7)
DIMM is faulty.(ID=0-5)
Action
CPU configuration may be
different between the CPU/IO
modules.
Replace the CPU.
If this does not help, replace the
CPU/IO module.
Memory of the different types is
installed.
Replace DIMM with appropriate
one.
If this does not help, replace the
CPU/IO module.
Replace DIMM.
If this does not help, replace the
CPU/IO module.
When the system is running in
the duplex mode, it is no
problem.
If the system cannot be running
in the duplex mode due to
continuous this error, replace the
CPU/IO module.
If this does not help, replace
another CPU/IO module or
center plane.
This BIOS revision cannot
support the duplex mode.
Update the BIOS revision.
Check the PCI configuration.
If this does not help, replace the
CPU/IO module.
Unsupported CPU may be
mounted.
Replace the CPU.
If this does not help, replace the
CPU/IO module.
Replace the CPU.
If this does not help, replace the
CPU/IO module.
Replace the DIMM.
If this does not help, replace the
CPU/IO module.
Replace the DIMM.
If this does not help, replace the
CPU/IO module.
Replace the CPU.
Replace the DIMM.
If this does not help, replace the
CPU/IO module.