NEC N8800-096F User Manual page 350

When you attempt to integrate the CPU module, the following message will be
recorded to the system event log and the CPU module may not be integrated. It
indicates that some kind of error has occurred when integrate the module. Contact
your sales agent, since device replacement will be required.
Source:
Type:
Event ID:
Description:
IO module is not integrated:
When you attempt to integrate the IO module that caused an error in the past, the
following message will be recorded to the system event log and the IO module will
not be integrated. In this case, contact your sales agent, since device replacement
will be required.
Source:
Type:
Event ID:
Description: The driver was not able to bind South Bridge. It has broken down in
Source:
Type:
Event ID:
Description: The driver was not able to bind PCI Express 0. It has broken down
Source:
Type:
Event ID:
Description: The driver was not able to bind PCI Express 1. It has broken down
When you attempt to integrate the IO module while PCI device is not completed to
separate, the following message will be recorded to the system event log and the IO
module will not be integrated. In this case, wait for a while and try to integrate IO
module again referring to Chapter 5 "Start and Stop of Components."
HasCtrl
Error
1003
The driver failed to bind the CPU module. [Module[Module
Number]]
[Module Number] "#0" or "#1"
HasCtrl
Warning
1407
the past. [Module[Module Number]]
[Module Number] "#0" or "#1"
HasCtrl
Warning
1405
in the past. [Module [Module Number]]
[Module Number] "#0" or "#1"
HasCtrl
Warning
1406
in the past. [Module [Module Number]]
[Module Number] "#0" or "#1"
Troubleshooting 7-23