NEC N8800-096F User Manual page 220

No. Error message
4
The KVM request was aborted.
5
UDP packet transmission failed.
6 Remote KVM console can not
activate because it is disabled
7 Remote KVM Console is used by
other client.
8 Failed to shut down Remote KVM
Console.
9
Failed to make settings.
10
The UDP connection is closed.
System event log (SEL) display errors
No. Error message
1
Failed to clear session event logs
of BMC.
2
Failed to acquire system event
logs.
Sensor data records (SDR) display error
No. Error message
1
Failed to acquire sensor data
records.
Field replaceable (FRU) information display error
No. Error message
1
Failed to acquire field replaceable
units information.
If you do not find any problem, contact your service
representative.
This is not a problem. Click [OK] and close the
message box.
Check the network environment and server.
If you do not find any problem, contact your service
representative.
Refer to page 4-65 and enable remote KVM console.
Try again after the client using Remote KVM Console
finishes using.
Use Remote KVM Console after waiting 3 or more
minutes.
Check the network environment and try again.
Contact your service representative if the error
persists.
Check the network environment and server.
If you do not find any problem, contact your service
representative.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
The network may be busy. Try again. If the error
persists, contact your service representative because a
failure may have occurred in BMC.
The network may be busy. Try again. If the error
persists, contact your service representative because a
failure may have occurred in BMC.
System Configuration 4-83
Action
Action
Action
Action