Table of Contents
Advertisement
Figure 2. HDD Group Settings Menu
5.
Select OK to save and exit menu.
Note:
By default, all HDDs belong to group 1.
Setting HDD Status
alarm shop
You may change the behavior of your HDD by changing its status. The status of a HDD can be set to redundancy,
read-only or read/write (R/W).
Setting HDD to Read-Only
A HDD can be set to read-only to avoid important recorded files from being overwritten when the HDD becomes full.
To set a HDD to read-only:
1.
Enter the HDD Management menu by clicking Menu > HDD.
2.
Select HDD to protect.
3.
Select the Property button to enter the Property Settings menu, as shown in Figure 3.
Figure 3. HDD Property Settings Menu
79
Advertisement
Table of Contents
