3.
For RAID0, select the desired stripe size. Available stripe sizes are 16, 32, and 64 KB
(default).
NOTE:
NEC recommends that you do not change the default.
4.
Create RAID via allows you to select between the different creation methods for RAID0
and RAID1. The following table gives examples of when each is appropriate.
RAID level
Create via
RAID0
No Init
RAID0
Migrate
RAID1
Build
RAID
Clear
RAID1
Quick Init
When appropriate
Creating a RAID0 on new drives.
Creating a RAID0 from on new drive and one drive with
data you wish to preserve. (Your server does not support
this option.)
Any time you wish to create RAID1, but especially if you
have data on one drive that you wish to preserve. (Your
server does not support this option.)
Creating a RAID1 on new drives, or when you want to
ensure that the array contains no data after creation.
Fastest way to create a RAID1. Appropriate when using
new drives.
Configuring Your Server 4-37