Appendix A Specifications - NEC N8100-1005F User Manual

Appendix A
Specifications
Item
CPU Type
Clock
Number of processors
Maximum
Chipset
Memory Standard
Maximum
Expansion unit
Expansion times
Memory module
Error check
Graphics (VRAM)
Auxiliary Floppy disk (standard)
input device
Hard disk (standard)
Hard disk (maximum)
CD-ROM (standard)
5.25-inch file bay
3.5-inch disk bay
Additional PCI slot
Disk array
External Keyboard
interface
Mouse
USB
Serial
Parallel
Network
Display
Cabinet design
External dimensions
Weight
Power supply
Power consumption
Environmental Temperature
requirements
Humidity
*1 A maximum of three DIMMs can be installed to the server.
*2 The optional RAID controller is required.
*3 The optional SCSI controller is required.
Intel Pentium 4 processor
3.8GHz/1MB
1
1
Intel E7221
512 MB (512 MB × 1)
4 GB (1 GB × 4, the standard DIMM must be replaced.)
1 DIMM (256MB/512MB/1GB)
3 times
SDRAM DIMM (DDR400, Unbuffered type, Dual channel memory
configuration supported)
ECC
Chipset Graphic
3.5-inch drive × 1 (standard)
None
For onboard S-ATA channel: 750GB (250GB × 3)
For add-in SCSI card: 439.5GB (146.5GB × 3)
ATAPI interface × 1 (x40 speed)
2 slots (An ATAPI CD-ROM drive is factory-installed.)
1 slot (A 1.44MB-floppy disk drive is factory-installed.)
5 slots (1 slot for PCI-Express, 2 slots for 64bit/100MHz, 2 slots for
32bit/33MHz)
Standard (SATA controller)/Option (SCSI RAID controller)
MINI DIN 6-pin connector (1 port)
MINI DIN 6-pin connector (1 port)
4-pin (2 ports)
D-sub 9-pin (1 port)
IEEE1284 standard, D-sub 25-pin (1 port)
RJ-45 (1 port, 1000BASE-T/100BASE-TX/10BASE-T)
MINI D-sub 15-pin (1 port)
Desk-side, mini tower
173 (width) × 448 (height) × 453 (depth) mm
20 kg (Max.)
100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 Hz
420 VA, 415 W
10 to 35°C (operating), -10 to 55°C (non-operating, storage)
20 to 80% RH (no condensation)
NEC Express5800/110Ei
N8100-1005F
*1
*3
*2