NEC N8100-1005F User Manual page 74

4-12 Configuring Your Server
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
If you select a menu item preceded by symbol
See the table below for the items.
Option
Boot-time
Diagnostic Screen
Reset
Configuration Data
NumLock
Memory/Processor
Error
Multiprocessor
specification
Parameter Description
[Disabled] If enabled, the BIOS will display the NEC
logo during POST. Press Esc to switch to
Enabled
the POST execution screen.
[No] Select "Yes" if you want to clear the system
configuration data during the next boot.
Yes
Automatically reset to "No" in the next boot.
[Auto] Sets power on Numlock state.
On
Off
[Boot] If "Halt" is selected, the boot is stopped
when POST error occurs.
Halt
1.1 Defines Multiprocessor Specification (MPS)
version.
[1.4]
and press Enter, the appropriate submenu appears.
Your Setting
[ ]: Factory-set