NEC N8100-1005F User Manual page 226

9-16 Upgrading Your Server
NOTE:
bay and then slide the hard disk bay to the front of the server.
12.
Slide the hard disk bay to the front of the server.
NOTES:
Make sure that the screw securing hooks on the hard disk bay are
hang on the screws on the server. Also make sure that the craws on
the hard disk bay are inserted to the holes on the front of the server.
Make sure that all signal cables are not jammed between the server
chassis and hard disk bay.
Insert the hooks on the server into the holes on the hard disk
Claws
Hooks on which hard disk bay is hung
Plate on which hard disk bay is placed
<Server side>