NEC N8100-1005F User Manual page 248

9-38 Upgrading Your Server
12.
Insert the file bay into the server.
Push the file bay until a click occurs to lock it.
13.
Connect the interface and power cables to the 5.25-inch device installed from one side of
the server.
See "CABLE CONNECTIONS" described later for details.
IMPORTANT:
IDE file device.
NOTE:
end with the red line indicating pin 1 faces the mother board.
Top
CD-ROM drive
Use the built-in IDE interface cable for connecting the
Connect the interface cable of the floppy disk drive so that the
Left side viewed from the front
Floppy disk drive
Bottom
Red line