NEC N8100-1005F User Manual page 247

10.
Insert a file device into the file bay.
11.
Align the screw holes on the device with those on the file bay and secure the device by
using the four screws provided with the device.
IMPORTANT:
Use the screws provided with the optional device to secure it. If not,
use the screws provided with the server. Using screws longer than
the required length may cause the device to be damaged.
Align the front face of the device to be installed with the front face
of the normally equipped CD-ROM drive. When installing a device
that has a protrusion on its front face such as a cover, it may
interference with the front bezel. In such case, install a device
rearward so that it would not interference with the front bezel.
Upgrading Your Server 9-37