NEC N8100-1005F User Manual page 289

9.
If the optional board is installed, select the proper SCSI Adapter and press Enter.
– INITIO INI-A10XU2W SCSI Host Adapter
(When N8103-65F board is installed.)
– MegaRAID SCSI 320-1 Controller Driver
(When N8103-80F board is installed.)
– Win.NET Promise FastTrak S150 SX4 (tm) Controller
(When N8103-78F board is installed.)
Continue performing tasks according to the subsequent messages that appear.
10.
Update the system.
11.
Install the driver and make detailed settings.
SCSI controller (N8103-56F)
If your system has a controller (N8103-56F), following message often appears on the
display during the upgrade installation to Windows Server 2003.
Please type D:/i386 and click OK. (D: CD-Drive)
Insert disk
The file 'adpu160m.sys' on Adaptec Windows 2000 Family Manager set V1.12 S2 is
needed.
Type the path where the file is located, and then click OK.
If PROSet is already installed, uninstall the PROSet before upgrading.
If the teaming function is enabled, disable the function before uninstalling PROSet.
During upgrade installation, [Disk Insert] dialog box may appear.
If it appears, click Cancel.
When upgrade installation is completed, [Device Driver Wizard] dialog box may appear.
If it appears, click Cancel, then update the system.
Installing Windows Server 2003 D-9