Table of Contents
Advertisement
CHANNEL EDIT - STEP 1
Press
the highlight to the Channel Setup option and press
CHANNEL EDIT - STEP 2
To edit parameters shown in the Channel Setup menu, select the relevant channel and press
The Channel Edit menu will appear similar to the sample shown in Figure 3.10.
CHANNEL EDIT - STEP 3
If desired, edit the following channel setups in the Channel Edit menu:
!"CHANNEL NAME: An alpha-numeric label can be defined and/or changed here. Channel names
can be up to 12 characters in length.
!"CHANNEL NUMBER: A channel number from 01 to 99 can be changed here. NOTE: If you enter a
channel number that already exists, a dialog message appears indicating that this number is already in
use-assign a different channel number.
!"SWITCHER NUMBER: "0" represents the projector itself. This will likely always be the case for
the VX-3c.
!"SLOT: 1 (
!"LOCKED: If checked, all of the image settings for this channel are disabled. If unchecked (default),
all available image settings can be adjusted as desired.
!
IN MENU: If checked (default, except for automatically defined channels with unchanged parame-
ters), this defined channel will then appear in the list available when key is pressed. If unchecked, the
channel must be accessed via
play of the channel list is an option that must be set in the Preferences menu.
!"AUTO SOURCE: If checked, (default), the projector can automatically locate this channel when an
incoming input signal matches. If not checked, the projector can locate the selected channel only when it
is directly selected via on the keypad-and a change in input signal will not result in a channel change.
!"PREVIOUS CHANNEL: Select this option to see or change Channel Edit settings for the previous
channel in the Channel Setup list.
to display the main menu. To display the Channel Setup menu, press
Menu
editable
1.
Name
Number
2.
3.
Switcher
4.
5.
In Menu
6.
Auto Source
7.
Locked
8.
Previous Channel
9.
Next Channel
Figure 3.10. Channel Edit Menu (SAMPLE)
), 2 (
), 3 (
Input1
Input2
Chan
Channel Edit
Sync Type
pres2
S-Video
H-Sync
02
-15.73 kHz
V-Sync
0
-59.94Hz
Interlace
Slot
4
#
5
5
) , or 4 (
) for projector inputs.
Input4
Input3
on the keypad or via the Auto Source function. NOTE: On-screen dis-
3-18
OPERATION
Enter
. The Channel Setup menu will appear.
read only
Yes
hint text
Chan
3
, or move
.
Enter
Advertisement
Table of Contents
