Changing The Remote Escape Character - Multitech MultiModem II MT5600BA-V92 User Manual

Changing the Remote Escape Character

To improve security, you can change a remote modem's remote configuration escape character. The
remote configuration escape character is stored in register S13. The factory default is 42, which is the
ASCII code for the asterisk character (*). Setting S13 to 0 (zero) disables remote configuration entirely—
but if you do this remotely, you won't be able to change it back remotely!
Establish a remote configuration link with the remote modem as described in "Basic Procedure."
1.
Type ATS13=n, where n is the ASCII code for the new remote configuration escape character, and
2.
then press E .
NTER
Save the new value by typing AT&W and pressing E
3.
Type ATO<CR> to exit remote configuration.
4.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Chapter 5 – Remote Configuration
.
NTER
31