Chapter 8 - Troubleshooting
Your modem was thoroughly tested at the factory before it was shipped. If you are unable to make a
successful connection or if you experience data loss or garbled characters during your connection, it is
possible that the modem is defective. However, it is more likely that the source of your problem lies
elsewhere. The following symptoms are typical of problems you might encounter:
●
None of the LEDs light when the modem is on.
●
Modem does not respond to commands.
●
Modem cannot connect when dialing.
●
Modem disconnects while online.
●
Modem cannot connect when answering.
●
File transfer is slower than it should be.
●
Data is being lost.
●
There are garbage characters on the monitor.
●
Modem doesn't work with Caller ID.
●
Fax and data software can't run at the same time.
If you experience problems, please check the following possibilities before calling Technical Support.
None of the Indicators Light
When you turn on the modem, the LED indicators on the front panel should flash briefly as the modem
runs a self-test, and the liquid crystal display (LCD) should light. If the LEDs and LCD remain off, the
modem is probably not receiving power.
●
Make sure the modem's power switch is on, especially if you normally turn the modem on by
turning on a power strip.
●
If the modem is plugged into a power strip, make sure the power strip is plugged in and its power
switch is on.
●
Make sure the transformer module is firmly connected to the modem and to the wall outlet or
power strip.
●
If the power strip is on and the modem switch is on, try moving the transformer module to another
outlet on the power strip.
●
Test that the outlet is live by plugging another device, such as a lamp, into it.
●
The modem or transformer module may be defective. If you have another Multi-Tech modem, try
swapping modems. If the problem goes away, the first modem or transformer module may be
defective. Call Technical Support for assistance.
CAUTION:
Do not replace the power supply with one designed for another product; doing so can
damage the modem and void your warranty.
ATTENTION:
Ne remplacent pas le bloc d'alimentation avec un design pour un autre produit; Cela peut
endommager le modem et annuler votre garantie.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Chapter 8– Troubleshooting
39
Need help?
Do you have a question about the MultiModem II MT5600BA-V92 and is the answer not in the manual?
Questions and answers