Using At Commands - Multitech MultiModem II MT5600BA-V92 User Manual

Using AT Commands

You can use AT commands to configure your modem through a communication program's terminal
window.
How to Change the Country/Region Code
View the list of available country/region codes to find your country/region code by executing the
1.
command AT +GCI? <CR>
Note: A list of country/region codes is also available on the Multi-Tech Web site. Refer to
Country or Region Codes
Set and save the code by executing the following command:
2.
AT+GCI=nn <CR> (where nn is the country/region code).
OK displays.
The code then displays.
How to Verify the Code
Type AT+GCI?<CR>
or you can use this command:
ATI5<CR>
Example
Type AT+GCI=B5<CR> to set B5 as your country/region code.
1.
Type AT+GCI?<CR> or ATI5<CR> to verify that B5 was set. B5 indicates the configuration is set for
2.
any B5 country such as Canada and the United States.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
for details.
Chapter 3 – Using the Front Panel
Finding
11