Changing The Remote Escape Character - Multitech MultiModem II MT5600BA-V92 User Manual

Changing the Remote Escape Character

To improve security, you can change a remote modem's remote configuration escape character. The remote
configuration escape character is stored in register S13. The factory default is 42, which is the ASCII code for the
asterisk character (*). Setting S13 to 0 (zero) disables remote configuration entirely—but if you do this remotely,
you won't be able to change it back remotely!
1. Establish a remote configuration link with the remote modem as described in "Basic Procedure."
2. Type ATS13=n, where n is the ASCII code for the new remote configuration escape character, and
then press E
3. Save the new value by typing AT&W and pressing E
4. Type ATO<CR> to exit remote configuration.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
.
NTER
Chapter 5 – Remote Configuration
.
NTER
32