Maintenance Of Projector; Filter / How To Clean Or Replace The Filiters - Eiki LC-XNB4000N Owner's Manual

Maintenance of Projector

Filter
Keep the air filters clean by cleaning them periodically.
By using Filter Counter the projector can remind you of the timing.
There is black sponge attached just back side of the filter cover consists of a black frame.
How to clean or replace the filters
Turn off the projector, and unplug the power cord. Wait to allow the projector to cool
down sufficiently.
1. Push up 2 white stoppers of the Filter cover and remove it from the side of projector
as shown below.
2. Remove the spong case from the projector by pull it front the right hand side.
3. Clean the filters with a vacuum cleaner except for the back side of the sponge,
because the vacuum cleaner may suck it. Brush the sponge gently by a brush.
(Do not clean the filters with water.)
4. Insert the filter parts to the side of the projector first and then close the Filter cover by
pushing 2 white stoppers. Make sure that the Filter cover is well closed.
6. Reset the Filter Timer.(P.75)
1
3
Sponge filter
2
89