Eiki LC-XNB4000N Owner's Manual page 54

EZ Suite(Setting&Configuration)
SSID (Service Set Identification) : The same name of SSID must be assigned to
Security : you can configure the security settings of your wireless network.
There are three wireless security modes supported by the Router : Open,
WPA2 and WPA.
Open – it means no security settings of this wireless network. The default
WPA(default) and WPA2 – It's the WPA/WPA2 authentication type.
PSK (Pass-Key) : You can enter a key-code.
Channel : This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference
problems with another nearby access point.
Auto : The default setting is automatic, which can adjust the channel width for your
clients automatically.
V : Press the ENTER button to enable AP mode, and then press the ESC button on the
remote control to quit AP mode setting page.
X : Abort the setting, or you can press the ESC button on the remote control to quit
setting.
wireless devices in your network. Considering your
wireless network security, the default SSID is set to
be "rtwap".
setting is automatic that based on the wireless station's capability and
request.
52