Eiki LC-XNB4000N Owner's Manual page 53

EZ Suite(Setting&Configuration)
AP mode(Ad Hoc) :
Select the button, then press the ENTER button on the remote control to go to set
some parameters for being enabled under AP mode.
►
These settings are only for basic wireless parameters. If you are going to modify these
wireless parameters, the visual keyboard will pop-up on the screen. Press the
, , or
ENTER button to keyin the character. Press ESC button to quit the setting, it can help
you to configure your setting.
buttons to select a character on the visual keyboard, and press the
51