Maintenance Of Projector; Filter / How To Clean Or Replace The Filiters - Eiki LC-WIP3000 Owner's Manual

Maintenance of Projector

Filter
When a warning message appears to remind you to clean the air filter, please replace a
new one as soon as possible. Please check and clean the air filter periodically.
How to clean or replace the filters
Turn off the projector, and unplug the power cord. Wait to allow the projector to cool
down sufficiently.
1. Push up the white stopper of the Filter cover and remove it from the side of projector
as shown below.
2. Remove the Filter cover by pushing and sliding it as shown below.
3. Clean the filters with a vacuum cleaner except for the back side of the sponge,
because the vacuum cleaner may suck it. Brush the sponge gently by a brush.
(Do not clean the filters with water.)
1
3
2
60