Eiki LC-XNB4000N Owner's Manual page 89

Network Control Software Application
Before Use
Crestron Control
Projector Name
Location
Assigned To
Click button to send and save the setting that you modify.
Projector's Network Configuration
DHCP Enabled
IP Address
Subnet Mask
Gateway
DNS Server
Click button to send and save the setting that you modify.
Admin Password
Enabled
New Password
Confirm
Password
Click button to send and save the setting that you modify.
User Password
Enabled
New Password
Confirm
Password
Click button to send and save the setting that you modify.
Click button to leave this page.
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 14 single-byte alphanumeric
characters.
Show the location where the projector is. When editing, you can
enter up to 14 single-byte alphanumeric characters.
Displays the name used to identify the projector is assigned to
someone who can manage a network.
When editing, you can enter up to 14 single-byte alphanumeric
characters.
Assign an IP address to the projector from the DHCP server
automatically.
Set up IP Address when DHCP is disabled.
Set up Subnet Mask when DHCP is disabled.
Set up Gateway when DHCP is disabled.
Set up DNS Server address when DHCP is disabled.
Turn ON administrative password function if selected.
Enter administrative password. (Max length: 15 characters).
Re-enter administrative password.
Turn ON User password function if selected.
Enter administrative password. (Max length: 15 characters).
Re-enter administrative password.
87 87