Network Control Software Application
Before Use
ITEM SETTING
Power
Vol + (Volume +)
Vol + (Volume -)
Mute
Source List
Brightness
Contrast
Color
Sharpness
ZOOM
Menu
UP/Down buttons
Left/Right buttons
Source
Enter
Auto
Blank
About the Tools button :
Set up network configuration, projector network web browser login password and set projector name
from this page.
DESCRIPTION
Power On or Power Off the projector via network.
Adjust the volume up.
Adjust the volume down.
Mute the volume OFF / ON.
Select input source.
RGB1
RGB2
HDMI/DVI
VIDEO
S-VIDEO
USB
Adjust the image brightness level.
Adjust the image contrast level.
Adjust the strength of whole color.
This function can only be used under Video signal, S-Video signal, or
component video signal input.
Adjust the image sharpness.
Zoom in/Zoom out and Pan.
Display or hide the OSD main menu.
Use UP/Down buttons to select an items.
Use left/right buttons to select an items or adjust the value.
RGB1->RGB2->HDMI->USB->Video->S-Video->RGB1.
Use Enter buttons to select an item.
Automatically adjust the setting to match the current input.
Blank the projected image. The time of Blank mode can be set in
15 minutes, 30 minutes or 60 minutes. The projector will shut down
automatically after passing each set time.
86
86