Eiki LC-XNB4000N Owner's Manual page 76

MENU
Security Menu
Item
PROJECTOR
NAME
DHCP
IP
MASK
GATEWAY
Selection
Default is Projector network setting display which shows bits that can
Projector be recognized by ASCII.
When setting ON, projector's IP address will be assigned by
OFF / ON DHCP server automatically. When setting OFF, you can use
remote control to do setting manually.
Key in IP address manually. Press "ENTER" to do digit
setting. When appears, press
finishing value adjustment, press MENU to exit.
Enter MASK address manually. Press "ENTER" to do digit
setting. When appears, press
finishing value adjustment, press MENU to exit.
Enter GATEWAY address manually. Press "ENTER" to do
digit setting. When appears, press
When finishing value adjustment, press MENU to exit.
Step:
1. Use the ▲ /▼buttons to
2. Use the ◄ / ► buttons to
Description
▲ /▼ to adjust value. When
▲ /▼ to adjust value. When
74
select an item.
select an item or adjust the
value.
▲ /▼ to adjust value.