Rear - Eiki LC-XNB4000N Owner's Manual

Part Names

Rear

P
O
A
RS-232C
Serial data port for controlling the projector with
a computer or other RS-232 control device.
B
AUDIO IN 1 &
Mini jack port corresponds to computer input.
(RGB IN 1→AUDIO IN 1, RGB IN 2→AUDIO
IN 2)
C
RGB IN 1
Input analog RGB signal from a computer.
D
HDMI
Input digital HDMI signal from a Computer &
Video source.
E
USB Port (USB-A Type)
1. Supports USB Storage Device and USB
compatible hard disks.
2. Supports wireless (WiFi) USB dongle for
wirelessly projecting the computer's image.
F
USB Display Port (Mini-USB Type)
Support USB mini-B Connects from the
computer's USB Port by using the USB mini-B
type to A type cable. It also can access the
internal memory from projector to perform the
data.
G
LAN
Please see page77 Network Control Application
for details.
A B
N M
N
AUDIO IN 2
C D E F G H
L
H
S-VIDEO
Input the S-Video signal from a video source.
I
AUDIO IN 3, R / L
RCA type corresponds to video input.
J
SPEAKER
K
VIDEO
To composite the video signal from a video
source.
L
RGB IN 2/OUT
Input analog RGB signal from a computer or
connect an external monitor to this connection
to view the "RGB IN" input. Please see P.67 for
the setting.
M
AUDIO OUT
This jack outputs the audio signal from
computer& audio signal to external audio
equipment.
O
Slot for Kensington Micro
SaverSecurity System
Built-in Security Slot.
This security slot supports the Micro Saver®
Security System. Micro Saver® is a registered
trademark of Kensington Microware Inc. The
logo is trademarked and owned by Kensington
Microware Inc.
P
REAR IR RECEIVER
11
I J
K