MENU (PC Mode)
EZ Suite(EZ Display Function)
Running under WiFi Client Mode:
Projector Setup :
1. Connect an optional Wireless USB WiFi Dongle unit to the projector's USB Port (USB
-A).
2. Set the Client mode parameters at \..\settings\WiFi\Client mode\.
*For more information, please check the page53 'WiFi settings' for client mode.
3. Use remove control to select the WiFi Display item at EZ Display interface on the
screen. It will show the Ready for display image on the screen. And you can find the
4-character pass code on the screen too.
39
39