Pin Key In Operation - Eiki LC-XNB4000N Owner's Manual

MENU

PIN Key In Operation

When the projector is turned on and the
PIN LOCK PROTECTION is set to [ON],
the image will show as on the right side.
1. Press the MENU button on the projector
or remote control. Enter PIN code by
keypad or remote control.
2. How to enter a PIN code?
You can use control panel or remote
control.
CONTROL PANEL
(1) Press ◄ button: Select the [ 1 ]
(2) Press ▲ button: Select the [ 2 ]
(3) Press ► button: Select the [ 3 ]
(4) Press ▼ button: Select the [ Enter ] move to next row.(4~6,7~9,
(5) Press (backspace) item:
In case you enter a wrong digit, select
(6) Press item:
Once all four digits of the PIN are entered, select
►
NOTE
(1) Please enter: 0000 for first-time use.
(2) If the PIN is incorrect, a "Enter new code" message will be shown. Please try again. If the PIN
code input is incorrect for three times, a warning message will show up and the projector will
shut itself down in 30 seconds.
(3) If you have no idea about the PIN, please contact your dealer for help.
REMOTE CONTROL
The control panel and remote control buttons to enter a sequence
of PIN code is like the photo below.
to delete the wrong digit you entered.
to confirm.
76
~OK)