Troubleshooting; Indicator - Eiki LC-XNB4000N Owner's Manual

Troubleshooting

Indicator

The power and lamp indicators show the status of the projector. Before requesting repair,
check the projector status using the chart below. If the problem cannot be resolved,
contact your dealer.
In normal status~~~
POWER
Blinking In
Green
Lighting In
Green
Lighting In
Green
Lighting In
Green
In abnormal status~~~
POWER
Blinking In
Green
Blinking In
Green
Blinking
In Green (Fast)
Blinking In
Green (Slow)
LAMP
Off Stand by mode
Off On mode
Blinking In Red
Cool down mode
( Slow )
Blinking In Red
Cool down mode
( fast)
LAMP
Blinking In Red
Fan fault mode
( Fast )
Lighting In Red Lamp cover open
Blinking In Red
High temperature
( Fast )
Blinking In Red
Lamp fail
(Slow)
CONDITIONS
CONDITIONS
92
DESCRIPTION
Projector is ready to be turned
on.
Projector is on and operating.
Projector is in cool down mode
and will not respond to user
input.
When the projector is turned on
in 2 minutes after it was turned
off.
DESCRIPTION
The projector has detected a
problem of a slow internal fan
speed. The lamp will shut off
automatically. Contact your
dealer.
The lamp cover is open or there
is a problem with the lamp. If the
lamp door is closed and replacing
the lamp does not correct the
issue, contact your dealer.
The projector has overheated and
shut itself down.
Correct the over temperature
condition immediately.
1. Check that the ventilation slots
are free from obstructions.
2. Check the cleanliness of the
air filter.
The lamp does not light. Come
back to " stand by mode ", and
press the power button.