SpectraLink Butterfly User Manual page 57

Spectralink Butterfly User Guide
Scroll to Login and press Select.
4
Scroll to Remove login and press Select.
5
Scroll to the desired login and press Select.
6
Enter your password and press Ok.
7
If the system in use is removed, it is necessary to select one of the remaining systems or to
8
subscribe to a new one.
If one of the systems not chosen is removed, the handset remains connected to the system in use.
Creating a Login
To create a login, the system must allow subscriptions to be made. Some systems also require an
Authentication Code (AC). If more than one system currently permits subscription, you will need
to know the ID of the system to which you want to subscribe. Authentication Codes and system
ID's will be provided be the system administrator.
You can subscribe up to 2 systems, that is create 2 logins.
Press Menu to enter main menu.
1
Scroll to Settings and press Select.
2
Scroll to Advanced and press Select.
3
Scroll to Login and press Select.
4
Scroll to Create login and press Select. The handset will start searching for a system.
5
Scroll to the found system and press Select.
6
If required, enter an AC Code and press Ok to connect to the system.
7
Press Ok.
8
If the handset is already subscribed to 2 systems, you will have to remove a subscription before
creating a new subscription.
Selecting Login Automatically
When auto login is turned on, the handset automatically changes to another system when
necessary. Auto login should only be used when systems are separate, with no overlaps.
To activate auto login your handset must be subscribed to at least two systems.
Press Menu to enter main menu.
1
Scroll to Settings and press Select.
2
Scroll to Advanced and press Select.
3
Scroll to Login and press Select.
4
Scroll to Auto login and press Select.
5
If Off is selected, press Change to select On.
6
The handset automatically selects a system. The selected system is marked with an A.
14211600 Version 2.0
October, 2013 55