New Search For A Programme Using The Keyboard - TechniSat HDFS Owner's Manual

> Press the green 'Edit Mode' key to edit an existing search. See section
12.6.1 for details of using the keypad to edit the search term.
> Press the yellow 'select search' key to view a search list. See section
12.6.2 for details.
> Press the blue 'EPG Menu' to display the popup menu. See section 12
for details.
If there are already existing searches available you can also:
> Press the up/down arrow keys to scroll through the list.
> Press the OK key to view everything in a search list.
12.6.1

New search for a programme using the keyboard

If there are no previous searches saved and this is your first search, a key-
board will appear as shown below:
The current programme you have highlighted in any of the EPG views (Grid,
Programme and Overview) will be displayed by default in the search field. This
allows you to search quickly for other occurrences in the schedule as follows:
> Press the green 'Accept' key when you have typed your search term to
start searching the programme schedule. The keyboard will close and
the highlight will display the words 'Search is running...' and a list of all
occurrences of your programme will be displayed.
If you want to key in your own programme or channel to search for then you
have the following options:
> Use the arrow keys to move the orange highlight around the keyboard.
45