Current Satellite List; Reference Position - TechniSat HDFS Owner's Manual

15.2.4.14

Current satellite list

The saved satellite positions can be found in the satellite list.
> To rotate the antenna to a position included in the satellite list, use the
arrow keys to highlight the field under the label 'Current satellite list'
and press the OK key.
> Use the up/down arrow keys to select the desired satellite and press
the OK key to confirm. The antenna will now be rotated to the position
selected. The ongoing rotation will be indicated in the menu by the
blinking message 'turning'.
15.2.4.15 Turning to a satellite position
To turn the antenna to the position set in the satellite list, your receiver is equip-
ped with a 'turn to sat' function.
> Press the yellow 'Turn to sat' key to turn the antenna to the satellite
position selected.
15.2.4.16 Deleting a satellite position
To delete a satellite position from the satellite list, do the following:
> Use the arrow keys to highlight the 'Current satellite list' field and press
the ok key.
> Use the up/down arrow keys to select the satellite you wish to delete
from the list and press the OK key to confirm.
> Use the arrow keys to highlight the 'Sat delete' field and press the OK
key to confirm. A popup confirmation message will appear.
> Use left/right arrow keys to move the highlight to the 'OK' option and
press the OK key to confirm the delete operation.
15.2.4.17

Reference position

When installing the external installation, the motor must be set to the reference
position (0°). You can therefore use the function "Go to reference position" to
turn the motor to this position (0°) at any time.
> Press the green 'Ref. position' key to turn the antenna automatically to
the reference position.
103