Basic Settings - TechniSat HDFS Owner's Manual

> Press the blue 'Help' key to view a help screen.
15.2.2

Basic Settings

To access this menu option:
> Press the menu key and select 'Settings' - select 'Basic settings' from
the menu with the up/down arrow keys and the OK key.
> Press the blue 'Help' key to view a help screen.
The basic settings are as follows:
> Country – press the OK key to select the country you are in and set
the 'Time zone' field below. If you do not select a country you have to
set a time zone manually.
> Date/Time – press OK to select a channel to synchronise the date and
time to. For most occasions you can keep the default of 'Automatic'.
> Standby clock – Use left/right or OK keys to activate a clock on the
front panel of the receiver when in standby mode.
> IRC code – your remote control has three modes (SAT1, SAT2 and
TV). It can be set to control up to two satellite receivers and a televisi-
on. The default is 'SAT1'. To set the IRC mode, press the OK key and
the IRC code key (labelled SAT1, SAT2, TV) simultaneously.
> Quickstart – when this mode is activated the receiver will start faster
from standby mode. Please note: if Quickstart mode is on, the receiver
will consume more power.
HDMI TechniLink – use the left/right arrow keys or the OK key to
>
switch 'on' or 'off'.
93