Basic Settings - TechniSat HDFS Owner's Manual

14.3.2

Basic Settings

To access this menu option:
> Press the menu key and select 'Settings' – select 'Basic settings' from
the menu with the up/down arrow keys and the OK key.
> Press the blue 'Help' key to view a help screen.
The basic settings are as follows:
Standby clock – activates a clock on the front panel of the receiver
>
when in standby mode. Please note that the receiver will consume
more power when this is set to 'on'.
> IRC code – your remote control has three modes (SAT1, SAT2 and
TV). It can be set to control up to two satellite receivers and a televisi-
on. The default is SAT1. To set the IRC mode, press the OK key and
the IRC code key (labelled SAT1, SAT2, TV) simultaneously.
> Quickstart – when this mode is activated the receiver will come out of
standby more quickly. Please note: if Quickstart mode is on, the recei-
ver will consume more power.
> Auto standby – this allows you to set the receiver to automatically
enter standby mode after a set period of inactivity and when the timer
is within a user defined idle range. If switched on, you can set the fol-
lowing settings:
• Idle range start – the start time of the idle range.
• Idle range stop – the stop time of the idle range.
• Idle period [m] – the amount of time that passes before the receiver
goes into standby.
64