Table of Contents
Advertisement
>
Use the
one or more programmes (Point 7.1.1).
>
Press the
>
Now use the
>
Now press the
The symbol
>
Repeat this procedure as often as necessary until all programmes you wish to block
have been marked.
>
When you have completed configuring the programme list according to your preferen-
ce, press the
>
In order to activate the parental control feature, you must still enter your personal PIN
number under the following point
parental control feature as described in
7.2 Changing the PIN
The PIN number is set at the factory to
ture, you must enter a personal PIN number in place of the factory setting.
In order to change the PIN number, proceed as follows:
>
Press the
>
Use the
>
Confirm by pressing
The sub-menu
>
Use the
>
Confirm by pressing
>
Now use the
>
Now use the
>
Repeat this entry.
>
When you have completed entering the PIN number in this manner, press the
key twice to return to normal operation.
Please note that the parental control feature must still be activated as described in Point 7.3.
7.3 Cancelling blocking of individual programmes
In order to remove the parental control feature for individual programmes, proceed as in
Point 7.2. After entering your personal PIN number, select the desired programme, and press
the
key to remove the control feature.
When you have completed configuring the programme list according to your preference in
this manner, press the
7.4 Programme Search
As mentioned before, your receiver is pre-programmed to receive signals from the ASTRA
and EUTELSAT satellites. In order to receive new programmes, or other satellites, there are
various options of searching fro programmes by means of a programme scan.
a)
, in order to scan all satellites selected in the menu LNB Settings (Point 5.4) for
available programmes
b)
, in order to scan only the selected satellite for programmes or bouquets
function key to select the programme list in which you wish to block
function key (edit mode).
function key to select the function
will appear next to the programme selected.
key twice to return to normal operation.
key to call up the
to mark the line
.
will be displayed.
to mark the line
.
to enter the current PIN number (factory setting 0000).
to enter the desired new personal PIN number.
key twice to return to normal operation.
to mark the programme you wish to block.
Then you must switch on the
in order to activate the parental control fea-
.
26
.
.
.
Advertisement
Table of Contents
