TechniSat HDFS Owner's Manual page 96

15.2.4.1 Setting motor antenna East and West limits
To avoid mechanical damage to the satellite antenna or the LNB by physical
obstacles, you must first set the maximum degree of rotation to both East and
West. If there are any obstacles in the rotating field of the antenna (e.g. a wall
or chimney), these must be considered when setting the East-West limits.
If there are no obstacles in the rotating range of the antenna, set the limits so
that it can be rotated a little further than the most extreme locations of the satel-
lites to be received.
To setup a motorised antenna East and West limits do the following steps:
15.2.4.2 Deleting old limits
> Before setting new East/West limits you need to ensure any old limits
are deleted. Press the blue 'Actions' key to display the popup menu, as
shown below:
> Use up/down arrows and the OK key to select 'Delete limits' from the list.
> A message will be displayed warning you that you must set new East/
West limits. Press the OK key to confirm.
15.2.4.3 Setting a new East limit
> Use the arrow keys to move the highlight to the 'Save' field.
> Now press the right arrow key to rotate the antenna to the maximum
East position possible.
> Press the blue 'Actions' key and use up/down arrows and the OK key
to select 'Set east limit'.
> A popup will be displayed when it is set. Press the OK key to confirm
your setting, as shown below:
96