Sound Settings; Settings - Antenna Configuration - TechniSat HDFS Owner's Manual

14.3.4

Sound Settings

To access this menu option:
> Press the menu key and select 'Settings' – select 'Sound settings' from
the menu with the up/down arrow keys and the OK key.
> Press the blue 'Help' key to view a help screen.
You can set the following sound settings:
Audio language – sets the language of the audio transmission, if this
>
service is available.
> Subtitle language – sets the language of the subtitles, if this service is
available.
> Dolby Digital – switches Dolby Digital on or off. If active, Dolby Digital
audio will be output on the S/PDIF interface for any programme that is
broadcast with Dolby Digital. See section 4 for connection details.
AV sync [ms] – can be used to correct any time lag present between
>
video and audio.
> HDMI audio format – if you are connected to HDMI equipment this
sets the audio format transmitted over HDMI. Either PCM for transmis-
sion of the decoded signal or Bitstream for external decoding of the
audio signal.
14.3.5 Settings – Antenna configuration
See 8.1 for details.
66