Lifting Programme Block; Programme Search; Automatic Search/Scan - TechniSat DigiPal 1 Operating Manual

7.3 Cancelling parental control for individual
programmes
In order to delete the parental control block for individual pro-
grammes, proceed as per Point 7.1.5. First press the blue
function key (Change), then enter the PIN code. Select the
appropriate programme and use the green function key
(Parental Control) to remove the access control.

7.4 Programme search

There are various methods of proceeding with a programme
search, which will allow you to receive new programmes.

1. Automatic Search/Scan:

Select this type of search in order to scan the entire frequen-
cy range of the receiver for programmes.
2. Extended Search:
Select this type of search to scan only a specific range of fre-
quencies or channels for programmes.
3. Manual Search
Select this type of search to scan a specific frequency for
programmes.
When the search has been completed, your screen will dis-
play a message showing how many programmes have been
found by your receiver, and how many of these are new. New
programmes are stored in the Total list and can be added
to the Favourites list as per Point 7.1.
To perform a programme search first call up the Main
>
Menu. (Fig. 7-5)
Use the arrow keys up/down dto highlight the line
>
Search.
Confirm by pressing OK. The sub-menu Search will
>
be displayed (Fig. 7-6)
Now use the arrow keys up/down to select the
>
type of search method you wish to perform.
7.4.1 Automatic Search
> A message will be displayed, confirm this by pressing
OK. The entire input frequency range will now be
scanned for programmes. Please note any further
messages that are displayed on screen.
It may take more than 15 minutes to complete the
search.
You can terminate the search by pressing the red
>
function key.
All manuals and user guides at all-guides.com
29
(Fig. 7-5)
(Fig. 7-6)