No Sound; No Signal' Is Displayed On Screen; Channel Not Available' Is Displayed On Screen - TechniSat HDFS Owner's Manual

16.3 No sound

The receiver or the TV may be muted
> Check that the mute button on the remote control or the TV has not
been pressed.
The volume may be level may be too low
> Check the volume setting by using the remote control

16.4 'No signal' is displayed on screen

There is no valid signal being received
> Check that the coaxial cable from the satellite antenna is correctly fitted
to the antenna input on the receiver – remember to turn off power to
the receiver whilst checking connections.
> Check that the antenna is correctly fitted and aligned to the correct
satellite.
> Check that there are no obstacles between the antenna and the satelli-
te.
> Severe weather conditions such as heavy rain or snow can block the
signal.
The wrong AV channel is selected
> Check that the correct AV channel is selected on the TV

16.5 'Channel not available' is displayed on screen

Channel is currently not being broadcast
107