Select Tv Station; Select Radio Station; Programme Search; Automatic Search - TechniSat DigiPlus STR 1 Operating Manual

With integrated conax / cryptoworks decoding system for two smart cards
Hide thumbs Also See for DigiPlus STR 1:
Table of Contents

Advertisement

>
After you have changed the device in code in the above described manner, you auto-
matically return to the "Protection of minors" menu.
Attention!
Do not forget the device pin code. If this is the case however, please ask your specia-
lised dealer for help!
8.3.3 Select TV channel
>
Press the key OK. The Favourites list oof the TV list will be ndisplayed. The currently
set channel has been highlighted.
>
When pressing the red control key, a pop-up menu will be displayed. You now have
the option of selecting the required channel list type.
>
With the helpof the up/down arrow keys, select the requested channel category
(e.gB. Favorites list).
>
Confirm with OK. The selected channel list is displayed.
>
You can now select the channel you want to block with the arrow keys.
>
Pressing the yellow function key blocks the channel. The child protection the symbol
is displayed
>
In ordeer to block several channels simultaneously, highlight these as described in
8.1.2 (Block highlighting) and block these by pressing the yellow control key.
>
After configuring the channel list according to your requirements in this manner, return
to normal operation by pressing the Menu key.
>
To cancel the block for individual channels, proceed as described above. Select the
appropriate channel and remove the child protection symbol by pressing the yellow
function key.

8.3.4 Select radio station

In the samme manner as described in Section 8.3.3, block the radio stations.
8.4 Channel search
As mentioned before, your digital receiver has been pre-channeld to receive the satellites
ASTRA and EUTELSAT. There are several ways to carry out a station search run to receive
new channels or those from other satellites.

1. Automatic search

Use this search in order to look for channels in all the satellites contained in the menu LNB-
Settings (Sections 6.4 u. 9.4)
2. Satellite-search
Use this search in order to look for channels only in selected satellites.
3. Transponder-search
Use this search to scan the transponder of a satelliten.
next to the selected channel.
eingestellten Satelliten nach channeln
39
abzusuchen.

Advertisement

Table of Contents
loading

Table of Contents